Showing all 2 results

Push Start Car Keyless Entry Engine System Remote Control Smart System

 14,000
Auto Car Alarm Keyless Entry Engine System Remote Control Start Stop Central Lock PKE Car Engine Start Stop Push Button Name: Push Start System
  • 1 x Host
  • 2 x Remote Control Handle
  • 1 x Start Button
  • 2 x Sensing Antenna
  • 1 x Start Harness
  • 1 x Detection Harness
  • 1 x Restore Button
  • 1 x Manual
Specifications Fit For:12V battery car, van, pickup truck, SUV, etc., general-purpose products Operating Voltage:12V±3V Quiescent Current: less than 10mA Working Frequency:433MHz Features -Q6C intelligent one key to start the system, using smart chips, can provide a key to start / flameout, convenient and simple. -PKE keyless entry, automatic sensor switch lock function, near the car 2 meters, the automatic sensor unlock. -There is a remote start/flameout, countdown ten minutes off function. -Summer cool car, winter warm car, no longer bear the car when the uncomfortable. -With the identity function, the remote control is not able to start normally. Key Operation -Do not press the brake, short press to open the ACC sound, then press the "on" dashboard, the indicator light flashes, then short press off, you can cycle operation. -Brakes, short press, the system ignition start, light long light. -When the flame is turned on, the brakes are short pressed and the system is turned off. -Step on or not brakes, long press, the system can let go after the ignition, light long light. Note: Due to the manual measurement, there might be some errors.

Universal Auto Rubber Seal Strip Door Window Lock Trunk Hood Edge Trim 40Ft/12M

 5,800
Features: Color: Black Material: EPDM rubber Size: 49FT/12M   Functions:  Enhancing the leakproofness of your car, which make door closing more thick. Reducing the pavement and wind noise pass into the car to improve the driving comfort and avoiding the dust and rain into the car. You can apply to seal the front and back covers, which performs good in waterproof, dustproof and soundproof.   Installation: 1.Clean the edge of car door . 2, The sealing strip with a double-sided adhesive tape. 3, The sealing strip at one end of the protective film tear affixed to the door frame to determine the location, and then according to the line of the installation of simultaneous tear protective film, pressing the paste to ensure that the installation of contact sealing can be. 4, Paste after the ban to use hand to pull the sealing strip, banned in 3 days of washing water (rain no way back ah) within 24 hours as much as possible not to repeatedly open and close the door. 5, Close the door after construction will be a bit tight, please do not worry, in the first 2-3 days when it can be normal. 6, Please in the first 1-2 days of time to pay more attention to the door is not closed, safety first   Package List: 1 X Car rubber seal strip